Applications |
|
|
Provides closed circuit water cooling for CNG compressor packages.
Suitable for up to 110 kW CNG compressor package gas cooling.
Suitable for up to 74 kW gas engine jacket water cooling. ??????? |
Performance |
|
| 162 kW @ inlet air 25oC @ 5oC delta water |
|
| 86 kW @ inlet air 35oC @ 5oC delta water |
65.9 dBA @ 3 metres |
Installation |
| Water Connection |
2 x 40mm MPT |
| Electric Connection |
3 x 1 ph 200/252 AC 50 Hz |
| Motor power req'd |
3 x 600watt = 1.8 kW |
| Mounting Location |
on compressor house roof |
Water pump |
motor driven to be mounted in safe area |
| Advantages |
|
Provides environmentally safe closed circuit water cooling, eliminating risk of bacterial contamination, ongoing water treatment costs & daily evaporative losses of up to 20% associated with cooling towers. |
Experienced operators of water cooled systems know loss of efficiency over time due to corrosion & fouling of all water passages caused by open circuit water systems. |
| Service Characteristics |
| Motors |
6mthly light grease of bearings through grease nipples with premium grade lithium based grease. |
| Fins & Tubes |
clean as required to remove dirt, grease and other foreign matter |
Approvals and Ratings |
| Design Standard |
ISO 9001 |
| Design Codes |
????? |
| Parts and Material |
| Casing |
Made from the highest grade galvanized steel construction, powder coated inside & out for maximum moisture protection & utilizing rust free SS fasteners through out. |
| Coil |
Die formed plate type alumininium fins mechanically bounded to high efficiency inner grooved (riffled) cooper tube. |
| Fans |
Propeller fans are 660mm diameter with 27o fixed pitch and five blades. |
| Motor |
600 Watt, 6-pole, 240 Volt, 3.8 Ampere Recommended low fan speed.
|
